Uiterlijk 1 december in huis
|3D4Makers BV||bol.com||Uiterlijk 1 december in huis||29.95||Bestel|
Acrylonitrile-Butadiene-Styrene (ABS) is a thermoplastic and a copolymer that is used for rigid objects. It consists of 5-30% Butadiene, around 50% Styrene and the rest is Acrylonitrile.
ABS is a strong material with high toughness and impact resistance. The maximum operating temperature is between 85 °C and 100 °C, depending on the modifications. The minimum operating temperature is -35 °C. ABS is a flammable polymer to which flame retardant can be added. It is also subject to ageing by being exposed to the weather conditions (UV light, oxygen, moisture, heat) because Polybutadiene stimulates the oxidation of Polystyrene. This causes discolouration and the plastic loses its mechanical strength. In order to improve this UV stabilisers can be added.
The 3D4MAKERS ABS Filament contains unique properties because the material has an extremely constant diameter and roundness. On top of that the ABS Filament does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS ABS Filament particularly suitable for FDM and FFF 3D printers.
The material has an excellent adhesion between the layers. This results in great improvement of the impact resistance, strength, durability, the printing process and “warping”.
The ABS Filament produced by 3D4MAKERS meets the European regulations EC No. 1935/2004, EC No. 2023/2006 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food. The colorants used by 3D4MAKERS to colour the Filament also meet these European regulations.
Measurements & Tolerance
1,75 mm Filament
2,85 mm Filament
Melt Mass-Flow Rate (MFR) (220ᵒC/10KG)
15 g/10 min
Impact strength Notched Izod
Printer nozzle temperature
240 - 280°C
Heated bed temperature
90 - 110°C
Our experience while printing with the 3D4MAKERS ABS Filament is that it gives better results when used at higher temperatures than other ABS Filaments. This can vary with different printers.
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. This cannot be a room where people sleep.When the 3D printer is not being used it is important to keep the 3D4MAKERS ABS Filament in a bag and stored in a cool, dry and dark place.
|Kleur||Black | RAL 9011|
|Compatibel met||Alle Filament 3D Printers|
|Verpakking breedte||214 mm|
|Verpakking hoogte||63 mm|
|Verpakking lengte||222 mm|