PCL 100 Filament – Natural – 2.85mm – 750 gram

4.20 stars ( 84% ) from 31 ratings

TPC-91A Filament is a thermoplastic copolyester elastomer with both thermoplastic and elastomeric properties. TPC Filament is easier to print compared to other flexible filaments like TPU. The layer bonding in the Z direction of this material is extremely good meaning that it's almost impossible to detach the printed layers. Typical applications for this material are drive belts, vibration dampers, phone cases, wearables and other objects that need to take a lot of wear.

  • Easy to print.
  • Flexible properties.
  • Lengthening>500%

TPC-91A Filament Material Properties

  • Density 1.22 g/cm³
  • Tensile Strength 17.7 MPa
  • Elongation at tensile strength > 500%
  • Tensile Modulus 67 MPa
  • Tensile elongation break > 500%
  • Flexural Modulus 66 MPa
  • Shore A Hardness 91
  • Melting temperature tg 160°C

Print Settings

  • Print Temperature: 260°C (230-270 °C).
  • Bed Temperature: 60°C
  • Print Speed: 40 mm/s


Specificatie Waarde


Merk 3D4Makers B.V.
Kleur Black


Printmateriaal TPC Flex

Overige kenmerken

Compatibel met Alle Filament 3D Printers
Diameter 1.75 mm
Filament opties Flexibel
Gewicht 1250 g
Taal handleiding Engels
Verpakking breedte 214 mm
Verpakking hoogte 63 mm
Verpakking lengte 222 mm